The final chapter! So I’m done with the nightstands. And the headboard. And they are all in place in our freshly-painted bedroom. And it looks pretty good if I do say so myself. The color of the bedroom is called Almond, and really sets off the headboard and nightstands. Here’s the final pics I’m going to post:
The sealant I used to attach the ceramic tile to the nightstand frame is showing as white, but will dry as clear (according to the instructions on the sealant). I took these pictures at 2:30 this afternoon and now the sealant is almost completely clear. Also, I’ll have to get Casey to get us matching lamps; the ones you see here are just two lamps that we had that will work for now.
I still have to do some touch-up on the paint. Some places didn’t get enough and there are streaks in my current paint job. Also I’m not particularly pleased with the paint job I did on the corner of the wall and ceiling. But I do have some ceiling paint and can touch it up as well. All in all, it’s a pretty good job and (most importantly) Casey is pleased!
So… Now I have the second coat of polyurethane on the nightstands and headboard. I also have a third coat on the “high traffic” areas: the shelf, the front faces, top areas, etc. And it’s not the basic stuff, it’s Minwax Helmsman Spar Urethane; this stuff is almost like putting down a coat of metal on it. I’ve seen this stuff last 15 years without any change in the finish on some items I’ve built in the past. So the finish on these items will last probably longer than we need it to.
I’ve mounted the duplex outlet at the rear of the nightstands and wired in an extension cord cut to connect to the duplex outlet. All that’s left to do with these is to mount the front handle and cut the ceramic tile down to size and then glue in the ceramic tile. Next weekend I’ll paint the bedroom and move the furniture around, taking out the existing “cobbled-together” headboard and setting up the new headboard and nightstands. It will be busy but it will be great to finally get that done!
OK, so it’s been a while. I’ve been pretty busy on other things and haven’t had a lot of time to spend on the nightstands… until the last couple of days. So I’ve got the drawers assembled, well at least the boxes for them. Then after a bunch of sanding and staining, here’s the result:
Next up: a few days to put a few coats of urethane on the headboard and nightstands. I still have a little assembly to do, but I want at least one coat of polyurethane down before I do the drawer glides and put the face on the drawer front.
















